Cooling Water Test Kit
In addition to the issues faced with boiler water, cooling water systems require consideration of microbiological contamination, affecting heat exchangers. Corrosion control is usually achieved through chemical
treatment based on a number of different parameters including Nitrite, Molybdate and Phosphonate. Monitoring of these factors is essential to prevent overdosing.

The kit also contains a test for biocides, Chlorine by default, though this can be replaced with a Bromine
test if requested at no extra cost.

 

Cooling Water Test Kit

  • 1 x pH Pocket Meter
  • 1 x Conductivity / TDS Pocket Meter
  • 1 x pH 4.0 Buffer Solution (65ml)
  • 1 x pH 7.0 Buffer Solution (65ml)
  • 1 x pH 10.0 Buffer Solution (65ml)
  • 1 x Filtration Pack
  • 1 x Hardness Total Drop Test 5 - 1200 ppm
  • 1 x Hardness Calcium Drop Test 5 - 60 ppm
  • 1 x Chlorine Drop Test 10 - 20000 ppm
  • 1 x Phosphonate Drop Test 4 - 20 ppm
  • 1 x Nitrite Drop Test 10 - 2000 ppm
  • 1 x Molybdate Comparator 1 - 100 ppm
  • 1 x Iron Comparator 0.05 - 1 ppm
  • 1 x Chlorine LR Comparator 0 - 4 ppm

Contact our expert

Mads Hyldahl Mathiassen

+45 2761 4531