Guided wave radar for level and interface measurement in liquids with low DK value. It is particularly well-suited for level measurements in bypass or stilling wells and in hygienic liquid applications.

The radar is particularly well-suited for level and interface measurement in the chemical, petrochemical, power, and general industries. It is a flexible solution that can be used in tanks, media separation, and ammonia applications.

The radar is particularly well-suited for level measurement of solids in the cement, power, food, mineral, mining and maritime industries. It can be used for materials such as grain, plastic, coal, fly ash, and cement. The LG260 is available with a rod or cable and can measure up to 60 m, at temperatures between -40...+200 °C and up to 40 bar.

The radar is particularly well-suited for level and interface measurement of liquids under extreme conditions in the chemical, petrochemical, power, general and maritime industries. It can be used for aggressive media in tanks with agitators, vapors, high temperature, high pressure, and low dielectric constant. The LG270 can measure up to 60 m, at temperatures between -196...+450 °C and up to 400 bar.

The Echomax XPS transducers use ultrasonic technology to measure the level in a wide range of liquids and solids. The transducers can be fully submerged, are resistant to steam and corrosive chemicals, and can be installed without flanges.

XRS is an ultrasonic transducer that provides reliable and continuous level measurement of liquids and slurries in narrow lift stations, wet wells, channels, weirs, and filter basins using a beam angle of only 10° and a CSM rubber front

The SITRANS LT500 is a controller with level, flow, and pump control for radar and ultrasonic transmitters, transducers, or any 2-wire 4...20 mA device. It is ideal for level control applications with either one or two measurement points. Additionally, it features 6 relays and supports Modbus RTU, HART, PROFIBUS DP, PROFIBUS PA, and PROFINET.

The SITRANS LC300 is a capacitive continuous level meter for liquid, interface, and solid applications. It is ideal for standard applications in industries such as chemical, petrochemical, food, beverage, water, wastewater, raw materials, and cement. It can measure up to 25 m, 200 °C, and 35 bar.

A rotary level switch for level and material detection in bulk solids such as grain, feed, cement, plastic granules, and wood chips. It handles densities as low as 15.06 g/l with the optional rectangular paddle. It can be extended up to 10 m and withstands temperatures up to 600 °C and 10 bar.

RD100 is a 2-wire loop-powered, NEMA 4X enclosed remote digital display for process instrumentation.

SITRANS DR150 is a digital 4...20 mA HART display for remote reading of process instrumentation. The housing is available in plastic, aluminum, and stainless steel with up to IP68 protection. The display can be used to show level, flow, pressure, temperature, and weight.

RD200 is a universal display for level, flow, pressure, temperature, weighing, and other process instruments. The display accepts a single input of current, voltage, thermocouple, and RTD.