Logo
Smart Bilge Rivertrace 1024 Square

The OCD SMART Bilge 15 ppm monitor

The Smart Bilge Alarm from Rivertrace is utilizing the “Smart Cell” Detector Array Technology, where the OCM analyses all three oil types; HFO, Diesel, and Emulsions, at the same time without any need for re-calibration.

Moreover, the SMART Bilge has a competitive price, and the measuring cell can easily be replaced by a newly calibrated cell and purchased here.

For sales or commercial inquiries please contact us at marine@insatech.com.

Contact us now

Easy Maintenance and Replacement Calibrate Measuring Cell Available

The SMART BILGE is made up of 2 key components, the SMART BILGE ‘Module’ and the SMART ‘CELL’ measuring cell.

A replacement calibrated measuring cell is available here and is easily changed on board of the vessel and the calibration verification kits enable the crew to demonstrate that the monitor is within factory calibration to PSC Surveyors.

Moreover, a manual cell cleaning device is included as a standard when you buy the Smart Bilge Alarm, so you easily can uphold the routine maintenance.

Optical cell fouling is seen as a leading cause when the monitor malfunction or has incorrect readings. However, when operating and using the manual cleaning device, the “Smart Cell” remains in optimal operating conditions.

Smart Bilge Rivertrace 1024X16x9

Key Features

The 15ppm Bilge Alarm has the following features that benefits you:

  • Easy Maintenance with Exchange Scheme and Fleet Deals
  • Digital Certification Certificates with online portal giving Automated reminders
  • Onboard Calibration Check Kits
  • Worldwide approved service centres for calibration checks
  • Test button for demonstration of alarm points to port state control.

Is this what you need - contact us now!

Connected to the Bilge Water Separator

A 15ppm Bilge Alarm is normally used in connection to a ship's oil filtering equipment (also known as "bilge water separator"), monitoring the oil content of the separated/filtered water and stopping the discharge into the sea if the oil content exceeds 15ppm (parts per million).

The 15 ppm bilge alarm type "BilgMon 488" is type approved for this purpose according to the IMO Rules MEPC.107(49).

Furthermore, the 15ppm bilge alarm can in principle be used as a simple oil content alarm for other applications where the water does not contain solids or other substances disturbing the operation.

Want to know the price - Contact us here.

Smart Bilge 1 Rivertrace 1024X16x9

Service and assistance

Rivertrace continues to support a number of old monitors, which met the requirements of the previous IMO Resolution MEPC 60(33), including the;

  • OCD CM

Insatech offer worldwide support and service for all products including calibration facilities and consignment stock at key marine locations.

Insatech Medarbejdere Website MSR
For technical questions

Martin Søvind Jensen


Tel: +45 2761 4502

Email: Martin.Sovind@insatech.com

Write to Martin

Insatech Medarbejdere Website ASMI
For commercial inquiries

Astrid Mihut


Tel.: +45 5537 2095

Email: Marine@insatech.com

 

Contact us now

Specifications
Measurement
  • Oil Types:  HFO, Diesel, and Mixture C (IMO defined)
  • Clean water calibration: +/- 2ppm of factory set values
  • Oil range: 0 - 40 ppm
  • Accuracy oil + solids:  + / - 5 ppm up to 30 ppm
  • Solids discrimination: 100 ppm Iron Oxide in 10 ppm Diesel
  • Response time: < 5 sec (oil reading)
Alarms
  • Oil alarm 1 setpoint: 1 - 15 ppm user adjustable
  • Oil alarm 2 setpoint: 1 -15  ppm user adjustable
  • Oil alarm 1 delay: 0 - 5 seconds user adjustable
  • Oil alarm 2 delay: 0 - 600 seconds user adjustable
Input / Output
  • Analogue output: Loop powered 4-20mA / 0 - 20mA 24V
  • Switch inputs: 2 x switch inputs for separator & flow status
Data Storage and Retrieval
  • Calibration data storage: Stored in cell
  • IMO required data: Stored in Control enclosure
  • IMO required data retrieval: Via LCD displays, RS 232 comms link, or USB
Systems and Supply
  • Supply voltage: 115 or 230V AC, 50 - 60Hz (24V AC & 12V DC available)
  • Supply voltage Consumption: <50 VA incl. solenoid valve
  • Supply voltage tolerance: +/- 15%
  • Projected life:  > 50.000 hrs
  • Protection class: IP 65
  • Approvals: MEPC 107(49) - DNV-GL, USCG, CCS, Class NK, Russian Register, Transport Canada
  • Weight: 3,2 Kg / 7,05lb

Downloads

  • Data Sheet - Smart Bilgmon - Rivertrace
    English | pdf

Didn't you find what you were looking for? 

If you are looking for some specific material, please write to us. Then we will try to find it for you, and send it as soon as possible.

Fill out the contact form 

Consent for storing of submitted data *


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

To top

Search