Flow Captor 4115 S103 + 4015.3x S103

Flow Captor 4115 S103 4015 30 S103 Intro

Flow-Captor 4115 S103 + 4015.3x S103 for liquid media control, is operating seamlessly under EHEDG conditions, and has been specially crafted for compatibility with Tri-Clamp® connection systems.

Key features:

EHEDG certified Type EL CLASS I
For TRI-Clamp® System
Medium temperature up to +135 °C
Calorimetric principle without moving parts
4 - 20 mA current output or 0.1 - 10 V voltage output
Robust stainless steel construction (special encapsulation)

For sales or commercial inquiries please contact us at marine@insatech.com.

Remote system in high temperatures

The 4115 S101 + 4015.3x S101 provides a reliable solution for maintaining precise control and measurement even in environments with challenging temperature conditions.

With the capability to handle medium temperatures up to 135 degrees Celsius, this sensor can withstand the demanding conditions of the marine industry.

Its ability to seamlessly operate in remote systems ensures that electronics can be strategically located apart from the sensor, enhancing reliability and safety in marine applications.

Flow Captor 4115 S103 4015 30 S103 Ehedg

Electrical output

The Flow-Captor 4115 S103 + 4015.3x S103 from Weber Sensors is available with two different electrical outputs:

4115 S103 + 4015.30 S103

Analogue current output 4 – 20 mA

4115 S103 + 4015.31 S103

Voltage output 0.1 – 10 V

Exactly what you need? Contact us here

Works according to calorimetric measuring principle

Flow-captor 4115 S103 + 4015.3x S103 operates on the calorimetric measuring principle, providing unparalleled flexibility in adjusting the measuring range across a wide spectrum of quantities. Remarkably, the Flow-Captor achieves this without the use of mechanical components, ensuring electronic precision without the need for moving parts.

Need more information? Contact us here.

For technical questions

Martin Søvind Jensen

Tel: +45 2761 4502

Email: Martin.Sovind@insatech.com

Write to Martin

For commercial inquiries

Astrid Mihut

Tel.: +45 5537 2095

Email: Marine@insatech.com

Technical Specifications
Medium	Water-based

Sensor Data
Measuring range	continuously adjustable from 0 to 20 cm/s to 0 to 200 cm/s
Adjustibility	stepless from 10 % - 100 % by means of zero point and measuring range potentiometer
Medium temperature	max. +135 °C
Pressure	max. 30 bar
Response time	2 -10 sec. depends on measuring conditions
Linearity deviation	< 5% most favourable straight line related to the final value
Repeatability	< 2 %
Temperature drift	< 0.3% pro Kelvin

Mechanical data
Protection class	IP 65
Material housing / electronics	Makrolon®
Material housing / sensor	stainless steel AISI 303
Material of sensor head	Stainless steel AISI 303 (electro-polished)
Material TC - closure	stainless steel AISI 316L (electro-polished)
Sensor cable	2 m encapsulated, shielded silicone cable 3 x 0,5 mm²
Electrical connection	terminal block

Electrical data
Operating voltage	24 VDC ±10%
Power consumption	approx. 100 - 200 mA (at max. flow)
Ready for operation	approx. 10 sec. after power connection
Output 4015.30	4 - 20 mA
Load 4015.30	max. 600 Ω
Output 4015.31	0.1 - 10 V
Load 4015.31	≥ 100 k-Ohm
Protection circuit	reverse polarity & short circuit / overload protected up to max. 30 VDC only
Output display	green LED

Data Sheet - Flow-captor 4115 S103 + 4015.3x S103 - Weber Sensors
English | pdf

Download

Didn't you find what you were looking for?

If you are looking for some specific material, please write to us. Then we will try to find it for you, and send it as soon as possible.

Fill out the contact form

Name *

E-mail *

Specify instrument *

Consent for storing of submitted data *

Yes, I give Insatech permission to store and process my data in accordance with their privacy policies.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

To top

Weber Sensors Flow Captor 4115 S103 + 4015.3x S103

Remote system in high temperatures