Technical Specifications | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Range: | 0 – 30 ppm, Trend indication 50 ppm |
||||||||||||||||||
Accuracy: | According IMO MEPC. 107(49) |
||||||||||||||||||
Linearity: | |||||||||||||||||||
Display: | Yellow Graphic Display |
||||||||||||||||||
Power Supply: | 24 V AC or DC +/- 10% |
||||||||||||||||||
Consumption: | < 5 VA |
||||||||||||||||||
Alarm Points 1 + 2: | Adjustable between 1 – 15 ppm* *By request the alarm set point can be set to 5 ppm max. |
||||||||||||||||||
Alarm 1 Operating Delay: (for annunciation purpose) | Adjustable between 1 – 540 sec. |
||||||||||||||||||
Alarm 2 Operating Delay: (for control purposes) | Adjustable between 1 – 10 sec. |
||||||||||||||||||
Alarm Indication: (Alarm 1, 2, System Fault) | Red LEDs |
||||||||||||||||||
Alarm Contact Rating: (Alarm 1, 2, System Fault) | Potential free 1 pole change over contacts, |
||||||||||||||||||
Output Signal: | 0 – 20 mA or 4 – 20 mA selectable, |
||||||||||||||||||
Sample/ Fresh Water pressure: | 0 – 10 bar recommended range of installation |
||||||||||||||||||
Sample Flow: | Approx. 0.1 – 3 l/min |
||||||||||||||||||
Sample Water Temperature: | +1 to +65 °C |
||||||||||||||||||
Ambient Temperature: | +1 to +55 °C |
||||||||||||||||||
Roll: | Up to 45° |
||||||||||||||||||
Size: | Computer Unit: 185 mm W x 210 mm H x 65 mm D Measuring Cell Assembly: 140 mm W x 160 mm H x 65 mm D |
||||||||||||||||||
Distance Computer Unit to Measuring Cell: | Up to 0.5 m |
||||||||||||||||||
Weight: (with Measuring Cell) | 2.5 kg |
||||||||||||||||||
Degree of Protection: | IP 65 |
||||||||||||||||||
Pipe connections: | R ¼" Female |