Digital Indicator Programmable for U/I or Pt100 Input | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Display U/I | 5- digits red 7- segment- LED display, for U/I 14.2 mm high, the device is able to either indicate no decimals, one decimal, two decimals or three decimals. |
||||||||||||||||||
Display Pt100 | same as U/I- display, but 3- digits |
||||||||||||||||||
Input U/I | as U/I measuring unit alternatively |
||||||||||||||||||
Input Pt100 | connection of resistance thermometers in 2 step or 3 step controller technique display range: 0 ... +120°C |
||||||||||||||||||
Resolution | 10 bit A/D transformation |
||||||||||||||||||
Failure U/I | < ±0.2 % from final value of measuring |
||||||||||||||||||
Failure Pt100 | < ±1 °C ±1 digit |
||||||||||||||||||
Operation | by three elastic push- buttons, which are inserted in the removable front glass or from the front side. Material EPDM, to a great extent insensitive against mineral oils, solvents and acids |
||||||||||||||||||
Supply voltage | 230 VAC (switchable to 115 VAC) |
||||||||||||||||||
Power consumption | max. 5 VA respectively 5 W |
||||||||||||||||||
Working temperature | 0 ... +60°C |
||||||||||||||||||
Storage temperature | -10 ... +80°C for relative humidity |
||||||||||||||||||
Protection degree | IP 64 front plate against housing, |
||||||||||||||||||
Terminals | plug-in 15- poles screw-terminals |
||||||||||||||||||
Mounting case | 96x48 mm, l = 127 mm, according to DIN 43700, with fixed mounting elements and non-glare front glass, upon request with company logo, mounting with possibility of combination with other units, patent no. 3925633 |
||||||||||||||||||
Interference protection | The standards of the EMC for the industrial use are fulfilled. |
||||||||||||||||||
Measuring range | in correspondence with option ‘operation' reversible to min./max. measuring value display |
||||||||||||||||||
Switch-output | up to four relay contacts, switch mode normally open or normally closed and hysteresis programmable |
||||||||||||||||||
Relay data |
|
||||||||||||||||||
Switch status | indicated by red Ø 3 mm LED |
||||||||||||||||||
Analog output | 0/4 ... 20 mA max. burden 500 Ω or 0 ... +10 V max. 20 mA load. Range programmable. Version with galvanic isolation from the measuring signal and the supply voltage upon request |
||||||||||||||||||
Data memory | Memory of max. 150 events in the eprom with data conservation > 40 years, upon request together with internal buffered real time clock |
||||||||||||||||||
Reset or Holdinput | by optocoupler, galvanic isolated |
||||||||||||||||||
Material: Housing and back side | glass-reinforced bayblend T 88-2N with best mechanical characteristic features, colour black, UL-standard 94 V 1 |
||||||||||||||||||
Material: Front glass | red, transparent polycarbonate, dull, coated |
||||||||||||||||||
Material: Fixing screw | V 2 A stainless |
Digital Speed-Indicator with one Frequency Input | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Display | 5- digits red 7- segment- LED display, 14.2 mm high indication, the device is able to indicate no decimals, one decimal or two decimals. |
||||||||||||||||||
Input | optionally either from single-channel shaft encoders, non-contact three- wirepickups with PNP or NPN output, |
||||||||||||||||||
Frequency range | freely programmable in 1 Hz steps up to maximum 50 kHz |
||||||||||||||||||
Failure | < ±0.5 % from final value of measuring range ±1 digit |
||||||||||||||||||
Supply voltage for pickup | 15 VDC max. 30 mA for three-wire pickup or 8 V / 1kΩ for Namur pickup |
||||||||||||||||||
Operation | by three elastic push- buttons, which are inserted in the removable front glass or from the front side. Material EPDM, to a great extent insensitive against mineral oils, solvents and acids |
||||||||||||||||||
Supply voltage | 230 VAC (switchable to 115 VAC) |
||||||||||||||||||
Power consumption | max. 5 VA respectively 5 W |
||||||||||||||||||
Working temperature | 0 ... +60°C |
||||||||||||||||||
Storage temperature | -10 ... +80°C for relative humidity |
||||||||||||||||||
Protection degree | IP 64 front plate against housing, |
||||||||||||||||||
Terminals | plug-in 15- poles screw-terminals |
||||||||||||||||||
Mounting case | 96x48 mm, l = 127 mm, according to DIN 43700, with fixed mounting elements and non-glare front glass, upon request with company logo, mounting with possibility of combination with other units, patent no. 3925633 |
||||||||||||||||||
Interference protection | The standards of the EMC for the industrial use are fulfilled. |
||||||||||||||||||
Switch-output | up to four relay contacts, switch mode normally open or normally closed and hysteresis programmable |
||||||||||||||||||
Relay data |
|
||||||||||||||||||
Switch status | indicated by red Ø 3 mm LED |
||||||||||||||||||
Analog output | 0/4 ... 20 mA max. burden 500 Ω or 0 ... +10 V max. 20 mA load. Range programmable. Version with galvanic isolation from the measuring signal and the supply voltage upon request |
||||||||||||||||||
Data memory | Memory of max. 150 events in the eprom with data conservation > 40 years, upon request together with internal buffered real time clock |
||||||||||||||||||
Reset or Holdinput | by optocoupler, galvanic isolated |
||||||||||||||||||
Material: Housing and back side | glass-reinforced bayblend T 88-2N with best mechanical characteristic features |
||||||||||||||||||
Material: Front glass | red, transparent polycarbonate, dull, coated |
||||||||||||||||||
Material: Fixing screw | V 2 A stainless |