Logo
Technical Specifications
Meter Sizes Available

For GSCPS

  • 1” (100)
  • 1-1/2” (150)
  • 2” (200)
Flow range

6,7 GPM(25 L/min) - 330 GPM(1250 L/min)
Accuracy (Linearity)

± 0.5%
Repeatability

± 0.1%
Pressure Rating

Limited by fitting size, clamp size and temperature.
Operating Temperature Range
  • For GSCPS: -100° F to 225° F (-74° C to 107° C)
  • For SIP (up to 1 hour): 285° F (140° C)
Typical K-Factor
  • 1” (100): 896 PPG (237 Pulses/L)
  • 1-1/2”(150): 340 PPG (90 Pulses/L)
  • 2” (200): 181 PPG (48 Pulses/L)
Wetted Materials
  • Housing: 316 Stainless Steel
  • Bushings & Bearings: PEEK
  • Shaft: 316 Stainless Steel
  • Rotor: CD4MCu Stainless Steel
  • Rotor Supports: 316 Stainless Steel
  • Retaining Rings: 300 Series Stainless Steel
Recommended Strainer Size
  • 1”: 40 mesh (420 μm)
  • 1-1/2”: 18 mesh (1000 μm)
  • 2”: 14 mesh (1410 μm)
Frequency Output

100 - 1000 Hz
Calibration Report
  • Comes standard with G Series meters.
  • N.I.S.T. – Certification available.
Model/ Type
Product Identifier

G: G Series Precision Turbine Meters
Fitting Type

SC: Sanitary Clamp
Shaft/ Sleeve Bearing/ Thrust Bearing
  • 100: Sanitary Turbine HT 1 in., 1-1/2 in. Clamp (with 3A Certification) 
  • 150: Sanitary Turbine HT 1-1/2 in., 1-1/2 in. Clamp (with 3A Certification) 
  • 200: Sanitary Turbine HT 2 in., 2 in. Clamp (with 3A Certification) 
  • 100L: Sanitary Turbine HT 1 in., 1-1/2 in. Clamp - Low Profile Adapter (w/ 3A Certification) 
  • 150L: Sanitary Turbine HT 1-1/2 in., 1-1/2 in. Clamp - Low Profile Adapter (w/ 3A Certification) 
  • 200L: Sanitary Turbine HT 2 in., 2 in. Clamp - Low Profile Adapter (with 3A Certification)
Sensor Choice
  • blank: No Sensor - Turbine Body Only No Charge
  • 2: Standard sensor with 300mm lead wires 307
  • 3: IECEx/ATEX Intrinsically Safe 883
  • 6: Digital (Di-Mag) 5-32VDC, pull-up to 10VDC max (note 3)
Electronic Choice (Local)
  • blank: No Electronics - Turbine Body Only 
  • R4: RT40 backlit rate totaliser in Aluminium housing (note 1 and requires external DC Power) 
  • R5: RT14 backlit rate totaliser with 4-20mA and pulse outputs, in GRN housing (note 1)
  • R6: RT14 IECEx/ATEX Intrinsically Safe rate totaliser with 4-20mA and pulse outputs, in GRN housing (note 2)
  • R7: RT40 backlit rate totaliser in GRN housing (note 1 and requires external DC Power)
Notes

Note 1. Requires sensor choice 2
Note 2. Requires sensor choice 3
Note 3. Requires 3-pin connector and cable to be purchased separately
To top

Search